Excerpt from the March 2017 issue of International Journal of Engineering Research and Application by Vaibhav Ingle and Madhukar Sorte I....

NADCA offers its book outlining the causes of die casting defects and how to prevent them This is a comprehensive textbook for die...

Some highlights from NADCA’s online webinar – Defects in Die Casting: Surface Defects and Other Problems. This second course covers...

Improving battery technology and pending regulations on internal combustion engines are boosting the outlook for EVs, which means new...

By Tim Cowell, Hill and Griffith Company, Technical Director Shrink Porosity (Temperature) Note that the temperatures that affect the...

By Tim Cowell, Hill and Griffith Company, Technical Director Gas Porosity (Lubricant) The lubricant used on the dies or on the plunger...

By Tim Cowell, Hill and Griffith Company, Technical Director Gas Porosity (Runners) The next location of trapped air is likely to be in...

By Tim Cowell, Hill and Griffith Company, Technical Director Gas Porosity Porosity is the biggest problem in die casting. There are two...

NADCA EC-515 Die Casting Defects Course Review, Basics for controlling die casting defects - By Dr. Steve Midson Blisters are another...

Basics for controlling die casting defects - By Dr. Steve Midson The scrap report should be available to everyone in the plant. In fact,...

Controlling the temperature of a die casting die through the location of cooling lines is critical to performance and die life. A...

Regular reviews and benchmarks are important for successful die casting process evaluations Hill and Griffith offers this helpful Die...

(This post is a video that illustrates the typical spray nozzle arrangement for casting fan blades.) From the die casting video published...

(This week's post is a review of a die casting plunger lubricant patent US 5076343 A in order to learn more about the application and...